Rice-lake 880 Performance Series Indicator/Controller Techni Manual do Utilizador descarregar pdf (Página 81)

EDP Commands 75

6.1.5 Normal Mode Commands

The normal mode commands (see Table 6-20) transmit data to the EDP port on demand. The SX, EX, and all the

"X" weight retrieval commands are valid only in normal operating mode; all other commands are valid in either

setup

or normal mode.

Table 6-20. Normal Mode EDP Commands

Command Function

CONSNUM Set or query the consecutive number

UID Set or query the unit ID

SD Set or query the date. Enter six-digit date using the ye

ar-month-day order specified for the DATEFMT

parameter, using only the last two digits of the year.

ST Set or query the time. Enter the time using 24-hour format

SX#n Start serial port streaming. If port is configured to s

tream on port #1 - 4. (1=COM, 2=USBCOM, 3=Ethernet

Server, 4=Ethernet Client)

SX Start serial port streaming for the

port receiving the command, if port is configured to stream.

EX#n Stop serial port streaming. If port is configured to s

tream on port #1 - 4. (1=COM, 2=USBCOM, 3=Ethernet

Server, 4=Ethernet Client)

EX Stop serial port streaming for the

port receiving the command, if port is configured to stream.

RS Reset system. This is a soft reset. Used to reset th

e indicator without resetting the configuration to the

factory defaults.

S Sends a single stream frame from the scale to the port i

n the format defined by the Stream Format parameter

of the port receiving the command.

XA#n Transmit accumulator value in displayed

units for scale n

XA Transmit accumulator value in displa

yed units for selected scale

XAP#n Transmit accumulator value in

primary units for scale n

XAS#n Transmit accumulator value in

secondary units for scale n

XG#n Transmit gross weight in di

splayed units for scale n

XG Transmit gross weight in

displayed units for selected scale

XG2 Transmit gross weight in

non-displayed units for selected scale

XGP#n Transmit gross weight in primary units for scale n

XGS#n Transmit gross weight in se

condary units for scale n

XN#n Transmit net weight in displayed units for scale

XN Transmit net weight in displaye

d units for selected scale

XN2 Transmit net weight in non-displayed units for selected scale

XNP#n Transmit net weight in primary units for scale n

XNS#n Transmit net weight in secondary

units for scale n

XT#n Transmit tare weight in displayed

units for scale n

XT Transmit tare weight in displayed

units for selected scale

XT2 Transmit tare weight in non-displayed

units for selected scale

XTP#n Transmit tare weight in primary units for scale n

XTS#n Transmit tare weight in secondary units for scale

XE Returns a decimal representation of any error conditions

XEH Returns a hexadecimal representation of any error conditions

Note

The 880 only supports one scale.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 119 120

Comentários a estes Manuais

Sem comentários

Rice-lake 880 Performance Series Indicator/Controller Techni Manual do Utilizador Página 81

Comentários a estes Manuais

Manuais e produtos relacionados com Balanças Rice-lake 880 Performance Series Indicator/Controller Techni