Rice-lake 880 Performance Series Indicator/Controller Techni Manual do Utilizador descarregar pdf (Página 75)

Table 6-7. PORTS – Field Bus EDP Commands

Command Menu Description Choices / Range

FB.BYTESWAP#1 SWAP Specify byte swap for FB card NONE, BYTE, BOTH

FB.DEVICENETADDRESS#1 DVCNET Address for DeviceNet option 1-64

FB.PROFIBUSADDRESS#1 PRFBUS Address for Profibus option 1-126

EDP Commands 69

Ports – Field Bus Menu

Ports – Ethernet Menu

Command Menu Description Choices / Range

ETH.DEFAULTGATEWAY DFTGWY Default gateway valid IP address

ETH.DHCP DHCP Dynamic Host Configuration Protocal OFF, ON

ETH.DNSPRIMARY DNSPRI Primary DNS server address valid IP address

ETH.DNSSECONDARY DNSSEC Secondary DNS server address valid IP address

ETH.IPADDRESS IPADRS IP address for the indicator valid IP address

ETH.MACADDRESS MAC MAC address (read only) n/a – read only

ETH.NETMASK NETMSK Subnet mask valid IP address

ETH.CLIENT.ECHO CLIENT | ECHO Specifies whether characters r

eceived by the

port are echoed back to the sending unit.

OFF, ON

ETH.CLIENT.EOLDLY CLIENT | EOLDLY Port end of line delay Range: 0 - 255

ETH.CLIENT.RESPONSE CLIENT | RESPNS Response – specifies whether the port

transmits r

eplies to serial commands.

Parameter should be set to OFF to prevent a

reply from the indicator confusing an external

device (such as a printer)

OFF, ON

ETH.CLIENT.REMOTESERVERIP CLIENT | RMOTIP Remote IP address of the r

emote machine that

the 880 will connect to

valid IP address

ETH.CLIENT.REMOTESERVERPORT CLIENT | RMOTPT Remote port number of the remote machine

at the 880 will connect to

Range: 1 - 65535

ETH.CLIENT.SFMT CLIENT | SFMT Stream format – specifies the stream format

used for str

eaming output of scale data

(TRIGGE=STRLFT or STRIND)

Alphanumeric, max

Length: 200

ETH.CLIENT.TERMIN CLIENT | TERMIN Termination – selects the termination

character(s) for data sent fr

om the port

CR/LF, CR

ETH.CLIENT.TIMEOUT CLIENT | TIMOUT Inactivity disconnect timeout – connection is

opped after a specified period (in seconds) of

inactivity. Setting the value to 0 disables the

parameter

Range 0-65535

ETH.CLIENT.TRIGGER CLIENT | TRIGGE Selects the operation of the Client Ethernet

port

COMAND, STRLFT,

RIND

ETH.SERVER.ECHO SERVER | ECHO Specifies whether characters r

eceived by the

port are echoed back to the sending unit.

OFF, ON

ETH.SERVER.EOLDLY SERVER | EOLDLY Port end of line delay Range: 0 - 255

ETH.SERVER.PORT SERVER | PORT Port that the 880 uses for its server Range: 1 - 65535

ETH.SERVER.RESPONSE SERVER | RESPNS Response – specifies whether the port

transmits r

eplies to serial commands.

Parameter should be set to OFF to prevent a

reply from the indicator confusing an external

device (such as a printer)

OFF, ON

ETH.SERVER.SFMT SERVER | SFMT Stream format – specifies the stream format

used for str

eaming output of scale data

(TRIGGE=STRLFT or STRIND)

Alphanumeric, max

Length: 200

ETH.SERVER.TERMIN SERVER | TERMIN Termination – selects the termination

character(s) for data sent fr

om the port

CR/LF, CR

Table 6-8. PORTS – Ethernet EDP Commands

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 119 120

Comentários a estes Manuais

Sem comentários

Rice-lake 880 Performance Series Indicator/Controller Techni Manual do Utilizador Página 75

Comentários a estes Manuais

Manuais e produtos relacionados com Balanças Rice-lake 880 Performance Series Indicator/Controller Techni