Rice-lake 880 Performance Series Indicator/Controller Techni Manual do Utilizador descarregar pdf (Página 39)

Configuration 33

TAREFN BOTH

NOTARE

PBTARE

KEYED

Tare function – Enables or disables push-button and keyed tare.

BOTH – Both push-button and keyed tares are enabled

NOTARE – No tare allowed (gross mode only)

PBTARE – Push-button tares enabled

KEYED – Keyed tare enabled

PWRUPM GO

DELAY

Power up mode.

GO - In GO mode, the indicator goes into operation immediately after a brief power up

display test.

DELAY - the indicator performs a power up display test, then enters a 30-second warm up

period. If no motion is detected during the warm up period, the indicator becomes

operational when the warm up period ends; if motion is detected, the delay timer is reset

and the warm up period repeated.

ACCUM OFF

Accumulator – specifies if the scale accumulator is enabled or disabled. If enabled, accumulation

occurs every time a print operation is performed, while the weight is above the accumulator reset

threshold, as long as the weight returns to a value lower than the threshold between print

operations.

THRESH 0-999999 Accumulator Reset Theshold – when the weight falls below the value set, the accumulator is

rearmed.

CALIBR WZERO

WVAL

WSPAN

WLIN

REZERO

LAST

TEMP

Calibration – See Figure 3-10 for descriptions, and see Section 4.0 for calibration procedures.

SCALE Menu

Parameter Choices Description

Table 3-5. Scale Menu Parameters (Continued)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 119 120

Sem comentários

Rice-lake 880 Performance Series Indicator/Controller Techni Manual do Utilizador Página 39