Rice-lake Counterpart Configurable Counting Indicator - User Manual do Utilizador Página 24
- Página / 112
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
18 Counterpart Counting Scale Indicator
1. Stand scale base on its side to attach the bracket to the scale using the screws provided in the bracket kit.
2. Ensure that the cable underneath the scale base is threaded through the opening between the scale and the
bracket, otherwise it will not fit.(shown in Figures 2-18 and 2-19).
Ensure the cable from the
underside of the scale is run
between bracket and scale
prior to attaching bracket.
Note
Figure 2-17. Attach Bracket Assembly to Scale Base While Scale Is Tipped on its Side (DIGI S-XL Base Shown).
The DIGI S-YC scale base comes with
notched holes in the bracket assembly.
While plugging in the AC adapter, slide
the bracket assembly forward to allow
more room to work. Once the AC adapter
is connected, slide the bracket assembly
back and finish tightening the screws.
m,
Figure 2-18. Attach Bracket Assembly to DIGI S-YC Scale Base
3. Set scale base down on a flat surface positioning the bracket assembly at the edge of a table.
4. Attach the indicator to the bracket using the se
cond set of screws provided and screw white threaded
standoffs into indicator base as in Figure 2-19 if using the S-YC scale base and
then screw feet into the
bottom of the standoffs.
Figure 2-19. Indicator Attached to the Scale Base (DIGI S-YC Scale Base Shown)
- Counterpart 1
- User Manual 1
- Contents 3
- About This Manual 7
- 1.0 Introduction 8
- 1.4 Keypad Functions 9
- 1.5 Tare Recall 10
- 1.6 Annunciator Symbols 10
- 1.7 Softkey Setup 11
- 1.9 Indicator Operations 11
- 2.0 Installation 13
- Important 13
- 2.3 Enclosure Disassembly 15
- 2.5 Making Power Connections 16
- 2.6 Load Cell Wiring 16
- 2.7 Wire Specifics 17
- 2.8 Cable Grounding 18
- 2.9 Enclosure Reassembly 19
- 2.10 CPU Board Removal 19
- 2.13 Installing Option Cards 21
- Figure 2-14. CPU Board 22
- Counterpart Front View 25
- Counterpart Dimensions 27
- 3.0 Configuration 28
- 3.3 Revolution Configuration 29
- 3.4 ID Menu 30
- 3.5 Audit Menu 31
- 3.6 Calibration Menu 32
- 3.7 Setup Menu 33
- 3.7.1 Scale Menu 34
- Scale Calibration Menu 37
- Scale Format Menu 38
- Scale Format Menu Parameters 39
- 3.7.2 Feature Menu 40
- UNITWTUPDATE 41
- Feature Count Menu 42
- Feature Region Menu 44
- SOFTKEYS Menu 45
- Regulate Industry Menu 46
- 3.7.3 Serial Menu 48
- 3.7.4 Ethernet Menu 50
- 3.7.5 Print Format Menu 51
- 3.7.6 Scale Setpoints Menu 52
- Gross, Net, Piecent, %REL 53
- Sub-menu 53
- 3.7.7 DIG I/O Menu 56
- 3.8 Test Menu 57
- 3.9 Display Menu 58
- SETPT 2 - 6 59
- 4.0 Calibration 61
- 4.2 Five-point Linearization 62
- 4.3 Rezero 62
- 4.4 EDP Command Calibration 62
- 4.5 Revolution 63
- Calibration 63
- 4.6 More About Calibration 64
- 5.0 Scale Operations 65
- 0.000653642 - 0.000653 x 100 66
- 0.000653642 66
- = 0.098% 66
- Figure 5-1. ID Menu 68
- 5.5.2 Using a Stored ID 69
- 5.5.4 Clearing ID Codes 70
- 5.6 WeighVault 71
- 5.6.2 Using WeighVault 72
- 5.7 Totalization Counts 73
- 5.8 Parts Reduction Counts 74
- 5.10 Batch Operations 75
- DIGITAL I/O 76
- 5.12 USB Keyboard 77
- 6.0 Serial Commands 78
- 6.1.2 ID Commands 79
- 6.1.3 Reporting Commands 79
- 6.1.6 Normal Mode Commands 84
- 6.1.7 Unique Commands 84
- 7.0 Print Formatting 85
- Table 7-3. H1, H2 Formats 88
- 7.2 Customizing Print Formats 89
- 7.2.3 Using Revolution 90
- 7.2.4 Print Label Examples 90
- Count Format 91
- Pallet Label Format 91
- Gross Label Format 91
- Setpoint Format 92
- Total Label Format 92
- Gross/Tare/Net Label Format 93
- Accum Label Format 93
- 8.2 WLAN Card Installation 94
- 8.1 Enclosure Disassembly 94
- - - - - - 95
- 9.2.1 Using the P EDP Command 96
- <LF> 97
- 9.6 Digital Filtering 100
- 9.6.4 Audit Trail Support 101
- 9.7 USB Keyboard Interface 102
- 9.8 Serial Scale Interface 102
- 9.9 Regulatory Mode Functions 103
- 9.11 Updating Firmware 105
- Figure 9-4. Revolution Screen 106
- 9.12 Specifications 107
- 9.13 Specifications 108
- Counterpart Limited Warranty 109
- For More Information 110
Manuais e produtos relacionados com Balanças Rice-lake Counterpart Configurable Counting Indicator - User
Balanças Rice-lake Counterpart Configurable Counting Indicator - User Manual do Utilizador
(112 páginas)
(112 páginas)
Balanças Rice-lake Counterpart Configurable Counting Indicator - User Manual do Utilizador
(98 páginas)
(98 páginas)
Balanças Rice-lake Counterpart Configurable Counting Indicator - User Manual do Utilizador
(101 páginas)
(101 páginas)
Balanças Rice-lake Counterpart Configurable Counting Indicator - User Manual do Utilizador
(99 páginas)
(99 páginas)
Balanças Rice-lake Counting Scales - IQ6500 Installation and Operatio Manual do Utilizador
(41 páginas)
(41 páginas)
Balanças Rice-lake CW-90X Base Manual do Utilizador
(16 páginas)
(16 páginas)
Balanças Rice-lake CW-90X Over/Under/Washdown Checkweigher - Ethernet Manual do Utilizador
(38 páginas)
(38 páginas)
Balanças Rice-lake CW-90X Over/Under/Washdown Checkweigher - Lantroni Manual do Utilizador
(86 páginas)
(86 páginas)
Balanças Rice-lake WeighVault for CW-90/CW-90X - Installation Instruc Manual do Utilizador
(4 páginas)
(4 páginas)
Balanças Rice-lake WeighVault for CW-90/CW-90X - Pre-installation Che Manual do Utilizador
(1 páginas)
(1 páginas)
Balanças Rice-lake Datalogic PowerScan PD7100 Series Laser Scanner Manual do Utilizador
(324 páginas)
(324 páginas)
Balanças Rice-lake Datalogic PowerScan RF 8000 Series Laser Scanner Manual do Utilizador
(212 páginas)
(212 páginas)
Balanças Rice-lake Datalogic QuickScan QD2100 Linear Imager Hand-held Manual do Utilizador
(320 páginas)
(320 páginas)
Philips HTL1177B Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Soundbar-Lautsprecher Philips HTL1177B.
Wir stellen 1 PDF-Handbücher Philips HTL1177B zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentários a estes Manuais