Rice-lake 880 Performance Series Indicator/Controller Operat Manual do Utilizador descarregar pdf (Página 12)

Introduction 8

8. Press to return to CFG.

9. Press to return to the weigh mode.

1.4.10 Setpoints

Setpoints must be enabled in the setup mode to be accessible in the user setup mode.

To enter the setup mode:

1. Remove the large fillister head screw from the back of the enclosure.

2. Insert a nonconductive tool into the access hole and press the setup switch.

Indicator display changes to show

SCALE.

3. Press or until

SETPTS is displayed.

4. Press ,

SP CFG is displayed.

5. Press , press or to desired setpoint number.

6. Press to enter setpoint settings.

7. Select the type by pressing or to desired setting, then press to set the

value. For complete list of options see Section 3.2.13.

8. When all settings have been made, press to return to weighing

mode.

Setpoints are now accessible from the front panel menu.

Display or Edit Setpoint Value

1. Press . AUDIT is displayed.

2. Press or until

SETPTS is displayed.

3. Press and the first available setpoint number is displayed.

4. Press or to toggle through each setpoint that is operator accessible.

5. Press , is displayed.

6. Press again to display or edit the value. To edit the value:

• Press or to increment or decrement the value of the flashing digit.

• Press or to select the digit to edit.

• Press to move to the decimal point entry.

• Press or to adjust the decimal point placement.

7. Press to accept the displayed value.

8. Repeat the above steps to set

PREACT, if enabled

9. When all settings have been made, press to return to weighing

mode.

Setpoint Value and Preact Value may be accessible from the front panel

in weigh mode.

Some indicator configurations may not allow setpoint values to be

changed through the front panel or may require a password to display or

change the setpoint value.

Note

TARE

Note

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comentários a estes Manuais

Sem comentários

Rice-lake 880 Performance Series Indicator/Controller Operat Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Balanças Rice-lake 880 Performance Series Indicator/Controller Operat