Rice-lake Go-Between, Data Capture and Storage Manual do Utilizador descarregar pdf (Página 3)

Go-Between Installation and Operation 3

Power Source Coming From an External Power Supply

For devices that are powered by an external power source use Table 2 and Figures 2 and 3 (below).

Table 2. Go-Between Serial Wiring with Power Coming From an External Power Source

Serial Output From Source Coming from

External Power Source

Go Between Input

GND GND

TXD RXD

Figure 2. Go-Between Serial Wiring with Power Coming From an External Power Supply and Connected Directly

Figure 3. Powered by External Power Supply and Connected via Power Supply Connector

Note

Both the power and serial connections must be grounded.

Go-Between Troubleshooting

If not able to save onto a USB stick, use the following steps.

1. Remove the USB stick.

2. Turn off power to Go-Between.

3. Turn power back on.

4. Move the reset switch to off (away from the

USB stick).

5. Move back to on position.

6. Plug the USB stick in.

1 2 3 4

Sem comentários

Rice-lake Go-Between, Data Capture and Storage Manual do Utilizador Página 3